Learn How To Setup And Configure Linksys Wireless Router
The Linksys Router is user-friendly and provides the solutions to the users in very simple manner. However, the installation and the configuration is a problem, if the Windows system is being used. The Linksys wireless router provides complete Linksys support for the installation and configuration in easy step-by-step guidelines. After the initial setting up, it is very simple to customize the configuration of the Linksys Wireless router.
If you want to opt for Linksys router configuration and setting up done with certified technicians, the wide array of computer support packages will be the best solution.
Set up of Linksys Wireless Router
First of all select and purchase Linksys router based on your networking need. Then attach the antennas to the router and place it on a central location so as it is not surrounded by the metal. Locate the Linksys Wireless Router in such a manner that there is equal distance between the computers.
The next step is plugging the Ethernet cable into the Internet port. You will find the port on the back of the Linksys Wireless Router. You will have to connect the computer with the router by plugging in another Ethernet cable, to the Ethernet port on the computer. Attach the other end of the Ethernet port to the back of the router. Select the port where the "WAN" is not mentioned.
Next plug the router into electrical power outlet and wait till the power light stops flashing. You will see that the power light will blink as the Linksys Wireless Router is booting and this might take few moments top get completed. Reboot the system, so as the system can take access of the new IP address from the Linksys Wireless Router with the Dynamic Host Configuration Protocol (DHCP).
Steps for Linksys Wireless Router configuration
For the configuration of the Linksys Wireless Router, open the web browser and then type http://192.168.1.1/ onto the address bar of the web browser. Press "Enter". On the pop up box that appears use "admin" as the username and then leave the password space blank. You will have to connect to the internet and then select the option of "Internet Setup".
The next step is the selection of the connection type from the drop down menu that is available. Select the option of "DHCP" (Dynamic Host Configuration Protocol) for the cable modems or the "PPPoE" for majority of the DSL Modems. If you are not sure about such options, you can choose to check with your internet service provider.
The next step is to set up the service set identifier or the SSID. This will help in the identification of the Linksys Wireless Router and also change the password. Select the SSID which is unique and different from, other users.
Encrypt the wireless connection with the use of Wireless Encryption Protocol (WEP) key. Below the option of "Wireless Security", you will have to enter the passphrase and then select "Generate". This password will be required from the clients connecting to your system.
If you find these steps difficult or want any technical solution for the same, take assistance from the online tech support.
If you want to opt for Linksys router configuration and setting up done with certified technicians, the wide array of computer support packages will be the best solution.
Set up of Linksys Wireless Router
First of all select and purchase Linksys router based on your networking need. Then attach the antennas to the router and place it on a central location so as it is not surrounded by the metal. Locate the Linksys Wireless Router in such a manner that there is equal distance between the computers.
The next step is plugging the Ethernet cable into the Internet port. You will find the port on the back of the Linksys Wireless Router. You will have to connect the computer with the router by plugging in another Ethernet cable, to the Ethernet port on the computer. Attach the other end of the Ethernet port to the back of the router. Select the port where the "WAN" is not mentioned.
Next plug the router into electrical power outlet and wait till the power light stops flashing. You will see that the power light will blink as the Linksys Wireless Router is booting and this might take few moments top get completed. Reboot the system, so as the system can take access of the new IP address from the Linksys Wireless Router with the Dynamic Host Configuration Protocol (DHCP).
Steps for Linksys Wireless Router configuration
For the configuration of the Linksys Wireless Router, open the web browser and then type http://192.168.1.1/ onto the address bar of the web browser. Press "Enter". On the pop up box that appears use "admin" as the username and then leave the password space blank. You will have to connect to the internet and then select the option of "Internet Setup".
The next step is the selection of the connection type from the drop down menu that is available. Select the option of "DHCP" (Dynamic Host Configuration Protocol) for the cable modems or the "PPPoE" for majority of the DSL Modems. If you are not sure about such options, you can choose to check with your internet service provider.
The next step is to set up the service set identifier or the SSID. This will help in the identification of the Linksys Wireless Router and also change the password. Select the SSID which is unique and different from, other users.
Encrypt the wireless connection with the use of Wireless Encryption Protocol (WEP) key. Below the option of "Wireless Security", you will have to enter the passphrase and then select "Generate". This password will be required from the clients connecting to your system.
If you find these steps difficult or want any technical solution for the same, take assistance from the online tech support.
Source...