DIY Party Tent
- 1). Make three grommet holes, centered along one side edge of the bedspread, 1-inch from the edge, with the grommet tool.
- 2). Make two grommet holes on the opposite edge of the bedspread, at the corners, 1-inch from the edges.
- 3). Attach three screw eyes to the side of the house, corresponding to the bedspread grommet holes.
- 4). Hammer the nails through the bamboo poles, 1-inch from the top of the poles, to create dowels, which will keep the poles from sliding through the grommet holes.
- 5). Attach the bedspread to the house, hooking the screw eyes in the grommet holes.
- 6). Position the bamboo poles in the bedspread opposite edge grommet holes. Attach two 8-foot lengths of rope to the tops of each bamboo pole. Push the tent stakes into the ground 1-foot from the bottoms of the bamboo poles. Tie the ropes to the stakes to secure the poles.
Source...