Do you ever wonder if you can save a lot of money on your electric bill if you utilize alternative energy sources? Do you want to invest in household wind turbines, but are uncertain whether the investment will be worth it?

Well, you don’t have to wonder anymore: it’s now possible to build your own wind turbines from everyday products that you should be able to obtain without any problems!

All you need are the right plans, some basic knowledge of construction, and some easily obtainable materials. The project shouldn’t cost more than a few hundred bucks and you can do it in your own garage or shop.

Building and installing household wind turbines isn’t easy, which is why you need to get a good set of plans and blueprints.

Here is some information to get you started:

• The minimum wind speed in your area should be at least 11 mph. Anything less than that is not recommended for wind generators. As long as you live in an area with sufficient winds, your turbine should be able to generate enough energy to power your household appliances.


• You should have at least half an acre of land. The more room you have on your property, the better. This is because wind turbines should stand at least 30 feet tall. The higher they are over adjacent structures, the more energy you can expect. Now, some people are installing turbines on their rooftops these days. If you want to do this, consult with a professional assessor to make sure it’s a good idea.


• Don’t proceed with the project until you have the site assessed by a professional. The professional will survey your area on a “normal” day with an anemometer. He or she will determine the best position for your household wind turbines in order for them to work as efficiently as possible. You’ll be surprised at how much a wind generator can be affected due to location and position.

• Learn the different parts of a turbine sub-system. Each sub-system contains four parts: a rotor (blades), nacelle (body), a tower, and the electronic equipment. The electronic equipment includes parts such as the electrical cables, controls, ground support resources, and interconnection equipment.


• You can use PVC pipes or wood for the blades, with pipes being the most convenient choice. The tower needs to be something like an old chimney or stove pipe. Remember: it needs to be a great deal taller than everything else on your property. The body can be made out of steel pipes. The nacelle needs to be a hollow shell that is durable enough to contain all of the important equipment. Some people order pre-made nacelles made out of fiber glass.


• Learn the difference between a horizontal and vertical axis. Turbines with a vertical axis are more durable, but they are difficult to make. A horizontal axis is easier to make; as such, it’s more common in DIY projects.


• While good installation plans might be all you need, you still might want to consider consulting with an electrician to help you install the wind turbine. Even after it’s constructed, it still needs to be installed and implemented properly in order to power your home with electricity.

Take these guidelines into consideration when you begin your project. Wind turbines aren’t easy to make; but they don’t have to be difficult, either. A good amount of planning and preparation are needed in order to construct and install household wind turbines.

Whether you want to build them from scratch or order a kit, you need to check out [http://www.greenandthrifty.com/windpower] to learn more about wind turbines and how they work!