How to Charge a Spyder VS3
- 1). Install the battery in the trigger frame of the Spyder VS3. This can be done by unscrewing three screws on the left side of the trigger frame. Remove this panel and attach the battery to the battery harness. Replace the trigger frame panel and three screws.
- 2). Plug the Spyder A/C charger into the charging port on the back of the trigger frame and plug the other end into a power outlet.
- 3). Charge the Spyder VS3 for six to eight hours. Always unplug the gun once it is fully charged. The manufacturer warns that allowing it to charge for 24 or more hours can result in battery and electronics damage.
Source...