How to Use Hammerite Metal Paint
- 1). Brush away the loose scale on the metal with a wire brush to prepare it for the Hammerite primer.
- 2). Apply the Hammerite primer if you are adding Hammerite paint to a surface that is aluminum, galvanized, stainless steel, chrome, copper or brass; note that the primer takes an hour to dry.
- 3). Set the Hammerite Direct-To-Rust Metal, Radiator or Garage Door paint can on a towel, and open it with the putty knife or a screwdriver. Dip the paint brush in and coat the entire surface evenly with the paint. Coat the entire surface evenly with the spray if you are using it instead of brush-on paint.
- 4). Rinse the brushes off throughly with water, if necessary, and wait at least an hour if you used either the Direct-To-Rust Metal paint or Radiator paint before you touch or use the metal surface or radiator again. Wait at least four hours if you used the Garage Door paint before you touch or use it again.
Source...