How To Resolve The 0x00000050 Error In Windows XP
The 0×00000050 error typically surfaces whenever you restart your computer following the installation of the Windows XP Service Pack 1 (SP1) to your PC.
This error is a result of a conflict between Windows XP Service Pack 1 and the display adapter drivers that are being installed.
Typically, this error shows in Windows XP, however there have been reported cases of the error appearing in other Windows versions also.
The 0×00000050 Error is shown on your screen in this format:
To fix this error, just follow the steps explained in this tutorial.
How To Fix The 0x00000050 Error On Your System The first thing that you need to do when rectifying this error is to remove or uninstall the display adapter file from your system.
You do this by first starting Windows in Safe Mode.
You can do this initial step by restarting your computer, and then press F8 as your PC is booting up.
You will then be shown an options display from which you can choose Safe Mode using the arrow keys and pressing Enter.
Next choose which operating system you would want to start, in this case Windows XP in Safe Mode.
Afterwards click Yes on the message informing you that Windows is operating in Safe mode.
Following this, click Start, then Run, after which type msinfo32 in the box that pops up.
You would then need to confirm by clicking OK.
Next, you need to Expand Components from System Summary, then click OK.
On the right panel, look for the INF file message then exit the System Information utility.
What you want to do next is to click Start, right-click My Computer then go to Properties.
Afterwards select Hardware then go to Device Manager.
Next expand Display adapters, right click the display adapter, then select Uninstall.
Confirm by clicking OK.
You then click Start, choose Run, type cmd on the box that would appear, then confirm by clicking OK.
A command prompt window would then be displayed in which you should type the commands below, making sure that you press Enter immediately after each line:
Afterwards you should log back to Windows using an account with administrative privileges.
Next, wait for Windows to detect any new hardware in your system.
Once the Found New Hardware Wizard opens, choose Cancel.
In cases where you get a stop error message after you have deleted the latest display driver versions, you need to restart your PC then choose the Last Known Good Configuration option.
Recommended - Clean Out The "Registry" Of Your PC Another probable cause of blue screen errors such as 0×00000050 is your system's registry.
The term may not ring a bell to many computer owners but the registry is a very important component of your computer's system.
It plays a very crucial function and without it you would not be able run most Windows applications in your PC.
What the registry does is it functions as a databank for all files and programs that Windows uses for its operation.
And because this area in your system is always teeming with activity as information gets retrieved and exchanged, breakdowns and failures frequently occur.
When such things happen, you might notice that your PC's processing speed will slow down, files would not be loaded properly, eventually leading to costly blue screen errors.
To fix these types of issues, you need to use a registry cleaner, which is an application that fixes errors in your registry quickly and efficiently.
This error is a result of a conflict between Windows XP Service Pack 1 and the display adapter drivers that are being installed.
Typically, this error shows in Windows XP, however there have been reported cases of the error appearing in other Windows versions also.
The 0×00000050 Error is shown on your screen in this format:
- "STOP: 0×00000050 (0×8872A990, 0×00000001, 0×804F35D7, 0×00000000)
- PAGE_FAULT_IN_NON-PAGED_AREA"
To fix this error, just follow the steps explained in this tutorial.
How To Fix The 0x00000050 Error On Your System The first thing that you need to do when rectifying this error is to remove or uninstall the display adapter file from your system.
You do this by first starting Windows in Safe Mode.
You can do this initial step by restarting your computer, and then press F8 as your PC is booting up.
You will then be shown an options display from which you can choose Safe Mode using the arrow keys and pressing Enter.
Next choose which operating system you would want to start, in this case Windows XP in Safe Mode.
Afterwards click Yes on the message informing you that Windows is operating in Safe mode.
Following this, click Start, then Run, after which type msinfo32 in the box that pops up.
You would then need to confirm by clicking OK.
Next, you need to Expand Components from System Summary, then click OK.
On the right panel, look for the INF file message then exit the System Information utility.
What you want to do next is to click Start, right-click My Computer then go to Properties.
Afterwards select Hardware then go to Device Manager.
Next expand Display adapters, right click the display adapter, then select Uninstall.
Confirm by clicking OK.
You then click Start, choose Run, type cmd on the box that would appear, then confirm by clicking OK.
A command prompt window would then be displayed in which you should type the commands below, making sure that you press Enter immediately after each line:
ren %systemroot%\inf\INF file name from Step 5.What you want to do next is to close all open windows, then restart your PC.
inf *inf.
old ren %systemroot%\inf\INF file name from Step 5.
pnf *pnf.
old
Afterwards you should log back to Windows using an account with administrative privileges.
Next, wait for Windows to detect any new hardware in your system.
Once the Found New Hardware Wizard opens, choose Cancel.
In cases where you get a stop error message after you have deleted the latest display driver versions, you need to restart your PC then choose the Last Known Good Configuration option.
Recommended - Clean Out The "Registry" Of Your PC Another probable cause of blue screen errors such as 0×00000050 is your system's registry.
The term may not ring a bell to many computer owners but the registry is a very important component of your computer's system.
It plays a very crucial function and without it you would not be able run most Windows applications in your PC.
What the registry does is it functions as a databank for all files and programs that Windows uses for its operation.
And because this area in your system is always teeming with activity as information gets retrieved and exchanged, breakdowns and failures frequently occur.
When such things happen, you might notice that your PC's processing speed will slow down, files would not be loaded properly, eventually leading to costly blue screen errors.
To fix these types of issues, you need to use a registry cleaner, which is an application that fixes errors in your registry quickly and efficiently.
Source...