Linksys WAP11 Instructions
- 1). Plug one end of the Ethernet cable into a port on your computer.
- 2). Insert the other end of the cable into the "Internet" port on the WAP11. Connect the WAP11 to the power supply and plug it into a wall outlet.
- 3). Open a Web browser and type "192.168.1.245" into the address bar. Press "Enter" to open the WAP11 web-based utility. Leave the "Username" field blank and type "admin" as the password to access the utility.
- 4). Click the "AP Mode" tab and make sure "Access Point" is selected. Click the "Basic Setup" tab and locate the "SSID" section. Enter the name for your network in the "SSID" field and enter a password for the network. Click "Save Settings."
- 5). Remove the cable from your computer's Ethernet port and plug it into one of the ports on your router to create a wireless network with the WAP11.
Source...