How to Install a Stiebel Eltron
- 1). Press the tabbed edges on the side of the back cover and gently remove the back cover of the water heater unit.
- 2). Place the back cover on the wall in the chosen mounting area and screw the cover onto the wall using the provided screws. Place a screw into each of the three screw-holes in the back cover.
- 3). Place the water heater unit onto the back cover, top first, then press down gently to fasten the unit onto the back cover on the wall. You will feel it slide into place when the unit is secure.
- 4). Plug the power cord into the "Unit" port in the electrical junction box.
- 5). Plug the cold water supply hose to the "Cold Water" valve on the bottom left side of the unit, then plug the hot water supply hose to the "Hot Water" valve on the bottom right-side of the unit.
Source...