How to Install TorkLift Tie-downs
- 1). Place a plate washer and star washer over a 2-inch bolt. Insert the bolt into the hole that is located on the side of the truck frame under the bed. Use the bolt fisher to get the bolt through the hole.
- 2). Locate the hole that is in the spring bracket of the vehicle. Insert a 1-1/2-inch bolt into it. Do not place a washer on the bolt.
- 3). Place a flat washer and star washer over another 2-inch bolt. Insert this bolt through the crossmember under the truck bed.
- 4). Tighten the bolts with the torque wrench to 80 ft.-lbs.
Source...