How to Make a Snowman Glass Ball Christmas Tree Ornament
- 1). Remove the hanger from the top of the ornament.
- 2). Place a few drops of white paint into the ornament.
- 3). Cover the opening at the top of the ornament with a piece of paper towel and shake it until the inside is completely coated with the white paint. You may have to add a few more drops and shake again to finish the job.
- 4). Allow the ornament to completely dry.
- 5). Place the hanger back onto the ornament after it has completely dried.
- 6). Place the baby sock onto the top of the ornament to make a hat. Pull the hat farther down onto the back of the ornament as opposed to the front. This will leave more room to make a face on the front of the ornament.
- 7). Secure the sock onto the ornament with hot glue.
- 8). Feel for the hanger underneath the sock. Tie a bow around the sock with a piece of ribbon at the hanger.
- 9). Secure a jingle bell onto the knot with a dab of hot glue.
- 10
Cut off about 1 inch of the sock at the toe. - 11
Make tassels by cutting the top of the hat lengthwise into four equal parts, making sure to stop before you hit the hanger. - 12
Cut each of these four pieces in half, once again making sure to stop before you hit the hanger. - 13
Draw eyes and a smiling mouth on the front of the ornament with a black marker. - 14
Glue a small button onto the face with hot glue to produce a nose.
Source...