How to Rig Swimbaits
- 1). Hold the hook by the hook eye and allow the eye to be at the same level as the top of the swimbait. Note where the point is located and use the hook point to poke the back of the swimbait to mark this location. This marks where the hook point will come out.
- 2). Hold the hook up to the swimbait again and push the hook point in slightly.
- 3). Continue to push in the hook by sliding the swimbait through.
- 4). Keep pushing the hook through the swimbait until the hook point comes out of the mark you made on Step 1.
- 5). Straighten and wiggle the swimbait until positioning of the hook is secure.
Source...