How to Attach a Wire Wheel Accessory to a Drill
- 1). Put on your leather gloves, safety glasses and face shield.
- 2). Loosen the chuck of the variable speed drill motor and fully open the chuck to accept the wire wheel accessory.
- 3). Insert the mandrel of wire wheel accessory into the open chuck of the drill motor.
- 4). Turn the outer ring of the chuck counter-clockwise to close the chuck of the drill motor.
- 5). Lock the chuck around the wire wheel accessory. Make sure that the chuck is locked tightly to the wire wheel accessory to ensure that the mandrel does not slip in the chuck.
- 6). Lower your face shield.
- 7). Press the trigger of the drill motor to spin the wire wheel accessory.
- 8). Lower the spinning wire wheel accessory to a surface and make sure that the wire wheel accessory does not spin within the chuck of the drill motor. If the wire wheel accessory spins in the chuck, re-perform Step 5 to tighten the chuck of the drill motor.
Source...