Virago Seat Removal
- 1). Use a screwdriver to unscrew the screws holding both the battery box cover on the right-hand side and the left box cover on the left. Both are located in front the seat on either side. Set the screws aside and remove the both covers.
- 2). Use and Allen wrench to remove the hex nut at the top left corner of the tool box and then remove the tool box.
- 3). Use a wrench to remove the negative and positive battery cables and lift the battery out of the battery box.
- 4). Use the Allen wrench hex nut on the top left hand side inside the battery box and then remove the battery box
- 5). Slide the Virago's seat forward and then pull it straight up and off.
Source...