How to Bleed the Slave Cylinder on a Honda Accord
- 1). Locate the bleeder valve on the slave cylinder. The slave cylinder will have three bolts, two standard bolts on the underside of it that attach it to the car, and one on the side that serves as the bleeder valve. Make sure that it is closed.
- 2). Push down and lift up on the clutch pedal ten times.
- 3). Open the bleeder valve on the slave cylinder and allow any fluid and air to drain out.
- 4). Close the bleeder valve and top off the hydraulic fluid in the clutch fluid reservoir.
- 5). Repeat steps one through four until firmness is restored to the clutch pedal.
Source...