How to Conceal a Surround Sound
- 1). Locate the best position for the IR sensor. This location should be in a spot that is directly in view of the main seating position to ensure the remote signals can hit it.
- 2). Route the wire attached to the sensor to the plug on the distribution block. Insert the bare ends of the wires into this plug, following the color-coded wire assignments provided by the manufacturer.
- 3). Insert the 3.5-mm plug of the IR flasher into the distribution block.
- 4). Remove the adhesive backing of the flasher. Stick it over the IR sensor on the front of the component. This part is indicated by a small circular section behind the plastic front panel on the component.
- 5). Plug the jack on the AC power supply into the distribution block. Insert the other end into the AC outlet.
Source...