Keyless Entry Remotes: Program It Yourself to Save Money
Keyless entry remotes can fail for a number of reasons, most often with the battery dying, although there are other ways in which the keyless fob (as it is sometimes called, among other names) can be deactivated or deprogrammed.
In this case, you, the locked-out driver, may call your dealer to find out how to reactivate the remote keyless entry system to your car.
The dealer will likely tell you that you need to come in and have them reprogram the fob - for a price, of course.
Try other solutions first.
Money saving solutions If you have a spare key fob that you have forgotten about, this is obviously the cheapest solution to a potentially unnecessarily costly problem.
Look around in your cupboards.
If not, you'll have to reprogram your key fob.
Usually programming instructions can be found in the Owner's Manual of the car.
This is great advice, isn't' it? As long as you still have the manual.
If you do not have the manual, you'll need to do a search online.
The quickest way might be to type in the FCC id number on the back of the key fob.
It'll be at the bottom of the remote under various other information, perhaps.
Type this in and add "programming" to your search terms.
If none of the pages that show up have programming instructions, you can try a search by make and model.
Try inputting as much information about your car as possible including the make, model and year then typing in as many keywords as possible including any of the following: remote keyless entry, fob, smart key, program, reactivate, etc.
How to program smart keys Generally, programming the key will involve activating the car's computer through the ignition.
You will manipulate the key fob's buttons as you turn the ignition into RUN position (for example).
Instructions for reprogramming may involve repeating the same steps two or three times.
The programming instructions will vary widely from one make and model to another and possibly even from one year to another so be sure that you investigate as deeply as you can into search results pages in order to find the exact model and year.
However, ifyou can't find it this way, look up the closest possible match and try experimenting with those or some close variation.
You can program additional fobs by doing the same steps.
If you do not find instructions that work you may have to give up and call your dealer.
Typically, a care dealer will charge a half hour or an hour to reprogram the keyless entry system so this may be anywhere from $75 to $150.
They may sell you on the fact that this is better than having your car stolen or not being able to use your vehicle.
But it's really a last resort to toss $100 out the window, isn't it? Go ahead, try programming your keyless entry system yourself!
In this case, you, the locked-out driver, may call your dealer to find out how to reactivate the remote keyless entry system to your car.
The dealer will likely tell you that you need to come in and have them reprogram the fob - for a price, of course.
Try other solutions first.
Money saving solutions If you have a spare key fob that you have forgotten about, this is obviously the cheapest solution to a potentially unnecessarily costly problem.
Look around in your cupboards.
If not, you'll have to reprogram your key fob.
Usually programming instructions can be found in the Owner's Manual of the car.
This is great advice, isn't' it? As long as you still have the manual.
If you do not have the manual, you'll need to do a search online.
The quickest way might be to type in the FCC id number on the back of the key fob.
It'll be at the bottom of the remote under various other information, perhaps.
Type this in and add "programming" to your search terms.
If none of the pages that show up have programming instructions, you can try a search by make and model.
Try inputting as much information about your car as possible including the make, model and year then typing in as many keywords as possible including any of the following: remote keyless entry, fob, smart key, program, reactivate, etc.
How to program smart keys Generally, programming the key will involve activating the car's computer through the ignition.
You will manipulate the key fob's buttons as you turn the ignition into RUN position (for example).
Instructions for reprogramming may involve repeating the same steps two or three times.
The programming instructions will vary widely from one make and model to another and possibly even from one year to another so be sure that you investigate as deeply as you can into search results pages in order to find the exact model and year.
However, ifyou can't find it this way, look up the closest possible match and try experimenting with those or some close variation.
You can program additional fobs by doing the same steps.
If you do not find instructions that work you may have to give up and call your dealer.
Typically, a care dealer will charge a half hour or an hour to reprogram the keyless entry system so this may be anywhere from $75 to $150.
They may sell you on the fact that this is better than having your car stolen or not being able to use your vehicle.
But it's really a last resort to toss $100 out the window, isn't it? Go ahead, try programming your keyless entry system yourself!
Source...