Touch-Screen Installation Precautions
First, carefully remove the casing to the display, and write down the order to install the various components and corresponding accessories;
Second, the display device should be based on the size of choice, after a good touch screen, using double-sided adhesive to touch-screen frame (outer border) attached to the display and paste screen in the process of a touch-screen glass for liquid crystal display LCD screen, Touch Screen LCD Panel lead to the right;
3, according to touch-screen interface to provide the type of its link in the RS-232, USB or keyboard interface. If it is RS-232 interface, also need an external power supply, USB and keyboard interfaces to directly provide power, only one connection.
4, in the not to 10.4 Inch Touch Screen LCD and controller connected to circumstances, the first to install the application software TOUCHKIT (in CD), in the software TOUCHTKIT installer process, WINDOWS that there is no visa to continue the installation, does not affect the use of the software;
5, installing the application software and then install the USB controller driver, according to the computer prompts the installation is complete, it will touch screen and USB controller is connected to restart the computer;
6, the role of software installation for driving touch-screen, should also be on the touch screen for 4-point correction.
Click 4 points calibration, the effective area under the Touch Screen corresponding to the display device shows the correct image of the area, which is an effective touch screen to set boundaries, so this calibration is called "edge-to-edge" alignment.
Second, the display device should be based on the size of choice, after a good touch screen, using double-sided adhesive to touch-screen frame (outer border) attached to the display and paste screen in the process of a touch-screen glass for liquid crystal display LCD screen, Touch Screen LCD Panel lead to the right;
3, according to touch-screen interface to provide the type of its link in the RS-232, USB or keyboard interface. If it is RS-232 interface, also need an external power supply, USB and keyboard interfaces to directly provide power, only one connection.
4, in the not to 10.4 Inch Touch Screen LCD and controller connected to circumstances, the first to install the application software TOUCHKIT (in CD), in the software TOUCHTKIT installer process, WINDOWS that there is no visa to continue the installation, does not affect the use of the software;
5, installing the application software and then install the USB controller driver, according to the computer prompts the installation is complete, it will touch screen and USB controller is connected to restart the computer;
6, the role of software installation for driving touch-screen, should also be on the touch screen for 4-point correction.
Click 4 points calibration, the effective area under the Touch Screen corresponding to the display device shows the correct image of the area, which is an effective touch screen to set boundaries, so this calibration is called "edge-to-edge" alignment.
Source...