How to Change Codes on an ADT Security Manager 3000
- 1). Delete unwanted user codes before adding new user codes to the system. Use the number buttons on the electronic keypad to enter your Systems Master or Partition Master code and press the "8" button. Enter the user number associated with the user code that you want to delete, followed by the "#" and "0" buttons.
- 2). Add a new user code for your ADT Security Manager 3000. Enter your Systems Master or Partition Master code and press "8." Enter a user number, followed by the new user code; the keypad will beep to confirm that the new user code was successfully added.
- 3). Assign an authority level for the newly added user code. Enter your Systems Master or Partition Master code into the electronic keypad, and press the "8" button. Input the user number associated with the new user code, followed by the "#" and "1" buttons. Enter the desired authority level for the new user code; enter "0" if the number is for a standard user, "1" to assign the user code arm-only privileges "2" to assign the user code to a guest such as a babysitter, "3" to identify the user code as a distress code or "4" to assign the new user code to a Partition Master.
Source...