How to Change a Filter on an Admiral Washer
- 1). Wash any laundry in the appliance and wait for the Admiral to empty all water after completing a cycle. Remove the clean clothes.
- 2). Hold the agitator column in one hand while unscrewing the cap on top of the agitator with your other hand. Pull the cap and the bolt underneath it straight out of the agitator column, then remove the filter below.
- 3). Rinse the filter in a sink under cold water and wipe with a cloth.
- 4). Insert the filter into the agitator column and screw it on by hand until tight.
- 5). Replace the cap and screw on by hand until tight.
Source...