How to Install a Starter on a Gravely L1
- 1). Remove the Gravely's spark plug with pliers.
- 2). Cut the old starter rope just below the rubber handle.
- 3). Remove the starter cover with a nut driver.
- 4). Pull the starter assembly out, and use the pliers to release the tension on the recoil spring.
- 5). Unwind the old starter rope and remove it. Wind the new starter rope around the new starter assembly, and reset the spring tension with the pliers.
- 6). Place the new starter assembly back into the cover and bolt the cover down with the nut driver.
- 7). Slip the free end of the new starter rope back through rubber handle and mount it on the handle of the Gravely.
Source...