Instructions

• 1). Turn on the cassette deck by pressing either the "Power" button or the "On" button.
  
  
• 2). Place a pre-recorded tape in the left cassette deck. Then place a blank cassette in the right cassette deck. Press "Play" on the right deck to find out if the cassette is blank.
  
  
• 3). Press the "Pause" button on the right deck, then press the "Record" and "Pause" buttons down at the same time. A red light should light up just above the right deck. This signifies that the blank cassette is ready for recording.
  
  
• 4). Press the "Pause" button on the left deck, then the "Play" button. This will hold the tape in place until you are ready to start dubbing the tape.
  
  
• 5). Press the "Pause" button again on the right deck, then press the "Pause" button on the left deck to begin recording.
  
  
• 6). When the pre-recorded cassette is finished, the left deck will make a loud click, meaning it has automatically stopped. When that happens press the "Pause" button on the right deck to stop recording.
  
  
• 7). Repeat the steps for each cassette you dub.