How to Install the Front Door Speakers on a 2000 Chevy Truck
- 1). Pry out the trim that surrounds the door release handle by sliding a small flat blade screwdriver between the trim and the inner plastic cup. Work carefully--this is a fragile piece.
- 2). Pry off the the plastic cover at the bottom of the armrest cup and take out the two 9/32-inch screws located below the trim.
- 3). Pry off the sail panel at the front upper edge of the door panel.
- 4). Pry up and pull out the power window and lock panel. Disconnect the wiring plugs on the back.
- 5). Pry around the edge of the door panel with a panel tool until they are all loose. Lift the door panel up and remove it from the door proper.
- 6). Pry out the spring tab at the top of the speaker to release it. Lower the speaker and pull it out of the door, disconnecting the wiring from the back.
- 7). Plug your new speaker into the wiring and place it in the opening. Drill holes where the mounting tabs contact the door metal and screw the speaker into place.
- 8). Reassemble the door panel by reversing the dis-assembly steps.
Source...