Chevy Keyless Remote Programming Instructions
- 1). Enter your Chevy vehicle with your keyless remote and ignition key and close all of the doors behind you.
- 2). Insert your key into the ignition and press and hold down the "Unlock" tab on the driver's side door. Be prepared to hold the button through the following steps.
- 3). Turn the key to the "On" position and back to the "Off" position twice in quick order and release the "Unlock" tab on the driver's door. Wait for the car to respond by cycling the door locks automatically.
- 4). Hold down the unlock and lock buttons on your keyless remote for up to 30 seconds until the car responds by cycling the locks again.
- 5). Repeat step four with any additional remotes, waiting for the locks to cycle each time.
- 6). Turn the ignition to the "On" position to end the programming sequence, and you will be free to use your newly programmed remotes.
Source...