Removing the Front Seats

• 1). Unscrew the screw that secures the seat belt guide to the top of the seat, using a Phillips screwdriver.
  
  
• 2). Slide the seat to the full forward position.
  
  
• 3). Unscrew the two bolts that secure the rear ends of the seat brackets to the floor, using a ratchet and socket.
  
  
• 4). Slide the seat to the full rearward position.
  
  
• 5). Unscrew the two bolts that secure the front ends of the seat brackets to the floor, using a ratchet and socket.
  
  
• 6). Lift the seats out of the vehicle.
  
  

Removing the Rear Seats

• 1). Push in on the bottom of the rear lower seat, while pulling upward to disengage it from the retaining bracket on the floor, then lift the rear lower seat out of the vehicle.
  
  
• 2). Unscrew the two screws that secure the upper seat to the vehicle, using a socket and ratchet. The screws will be located along the bottom of the upper seat.
  
  
• 3). Lift the upper seat upwards to disengage the retaining hooks, then pull it from the vehicle.
  
  

Removing the Seat Covers

• 1). Open the zipper on the seat backs on the front seats, by sliding it upwards. Then carefully slide the cover material off the foam cushions.
  
  
• 2). Flip the front seats over.
  
  
• 3). Pull off the hog rings that secure the cover material to the seat frame, by spreading them open with a needle nose pliers.
  
  
• 4). Slide the material off the lower foam cushions on the front seats.
  
  
• 5). Pry off the staples that secure the cover material to the upper and lower rear seat frames, using a flat blade screwdriver.
  
  
• 6). Slide the cover material off the foam cushions.