How to Reprogram a Ford Keyless Remote
- 1). Sit in the Ford's driver seat and close the door. Buckle the seat belt so that the chime does not interfere with the programming sequence sounds. Do not depress the brake pedal at any time during the sequence.
- 2). Have all remote transmitters with you, as any transmitters left out of the programming sequence will no longer work. Place an ignition key in the ignition switch. Turn the key from the off position to the on position eight times within 10 seconds in rapid succession.
- 3). Confirm that the doors locked and unlocked after performing Step 2.
- 4). Press any button on the transmitter to be programmed and verify that the doors lock and unlock again. Repeat this step for up to three additional transmitters. Make sure you press the transmitter buttons within seven seconds of each other so that the programming mode does not time out.
- 5). Turn the ignition key off and wait 20 seconds before using any of your transmitters.
Source...